AFFINITY™EG 8100G

Dow®Dow Chemical

ENGAGE™Blown extrusion film grade

Blown film

When blended with polypropylene and polyethylene, the general-purpose plastomer has excellent impact properties, high flexibility and good elastic recovery, high-definition ventilation (high oxygen and carbon dioxide transmission rate), low-temperature sealing

AFFINITY™EG 8100G

Dow®Dow Chemical

ENGAGE™Blown extrusion film grade

Blown film, can be used in single layer and co-extruded film

Melting finger 1.0g/10 minutes, excellent impact performance when blended with polypropylene and polyethylene, high flexibility and good elasticity, high definition, breathability (high oxygen and carbon dioxide transmission rate), low temperature sealing

AFFINITY™GA 1000R

Dow®Dow Chemical

ENGAGE™modified composite blending

Modified mixing

Finger 660(g / 10 min), density 0.878g/cm3, FDA 21 CFR 175.105

AFFINITY™PL 1280G

Dow®Dow Chemical

ENGAGE™Blown extrusion film grade

Cast film, specially used as a sealant layer in soft structures such as meat, cheese, dry goods and consumer goods packaging materials

Melting refers to 6.0g/10 min, due to its excellent low-temperature heat sealing performance, ultimate heat adhesion strength, optical properties and strength, making it particularly suitable for high-speed forming-filling-heat sealing packaging production lines.

AFFINITY™PL 1880G

Dow®Dow Chemical

ENGAGE™Blown extrusion film grade

Designed for a variety of demanding packaging applications, including high-speed, form-fill-seal packaging.

Melting refers to 1.0g/10 minutes, low sealing initiation temperature, excellent hot tack strength, high performance sealing layer in flexible packaging

ENGAGE™ 8003

Dow®Dow Chemical

ENGAGE™Blown extrusion film grade

Impact Modification of Thermoplastic Elastomer Wire and Cable for General Purpose Applications

Melting finger 1.0g/10 min can improve the impact resistance of polypropylene and polyethylene can be cured by peroxide, silane and irradiation with excellent heat aging properties, compression set and weather resistance

ENGAGE™ 8402

Dow®Dow Chemical

ENGAGE™Injection Grade

Injection Molding Industrial Durable Goods and Consumer Durable Goods Impact Modification

Melting finger 30g/10 min, excellent flow characteristics of pellets, high transparency, weight reduction of parts

ENGAGE™ 8402

Dow®Dow Chemical

ENGAGE™Injection Grade

Injection Molding Industrial Durable Goods and Consumer Durable Goods Impact Modification

Melting finger 30g/10 min, excellent flow characteristics of pellets, high transparency, weight reduction of parts

ENGAGE™7256

Dow®Dow Chemical

ENGAGE™Blown extrusion film grade

Extrusion applications, cast film

Melt finger 2.5g / 10 min) Ethylene butene copolymer has excellent processing properties in extrusion applications

ENGAGE™7270

Dow®Dow Chemical

ENGAGE™modified composite blending

Applied to polymer modification.

Melt finger 0.80g/10 min, polyolefin elastomer is a general-purpose copolymer with a good balance between cost/performance performance.

ENGAGE™7447

Dow®Dow Chemical

ENGAGE™modified composite blending

It can be used alone or with other elastomers for customized polymer modification.

Melt finger 5.0g/10 min, ethylene butene copolymer, high melt flow rate, low density, talc powder added (untreated, 1 µm)

ENGAGE™7467

Dow®Dow Chemical

ENGAGE™modified composite blending

Polymer modification

1.2g/10 min, excellent impact resistance of pellets Very low density Talc added (untreated, 1 µm)

ENGAGE™8100

Dow®Dow Chemical

ENGAGE™modified composite blending

Impact Modification of Thermoplastic Elastomer Wire and Cable for General Purpose Applications

Pellet melting refers to 1.0g/10 min. After addition, the impact resistance of polypropylene and polyethylene can be improved. Peroxide, silane and irradiation can be used for curing, with excellent thermal aging performance, compression set and weather resistance.

ENGAGE™8137

Dow®Dow Chemical

ENGAGE™modified composite blending

Impact Modification of Industrial and Consumer Durable Goods for Injection Molding

Melting finger 13g/10 min, low density, excellent flow characteristics, toughness, softness, talc powder (untreated, 1µm)

ENGAGE™8180

Dow®Dow Chemical

ENGAGE™modified composite blending

Thermoplastic Elastomer for General Purpose Impact Modified Thermoplastic Polyolefin (TPO) Wire and Cable

Melting finger 0.50g/10 min, excellent flow characteristics can be added to improve the impact resistance of polypropylene and polyethylene can be cured by peroxide, silane and irradiation, and after curing, it has excellent thermal aging performance, compression set and weather resistance.

ENGAGE™8187

Dow®Dow Chemical

ENGAGE™modified composite blending

Universal thermoplastic elastomer impact modified thermoplastic olefin (TPO) wire cable

Melt finger 0.50g/10 min, improved impact on polypropylene and polyethylene with high filling amount of peroxide, silane and radiation curing Excellent heat aging, compression set and weather resistance after curing

ENGAGE™8200

Dow®Dow Chemical

ENGAGE™modified composite blending

Thermoplastic Elastomer for General Purpose Impact-Resistant Modified Wire and Cable

Melting finger 5.0g/10 min, excellent electrical properties can be added to improve the impact resistance of polypropylene and polyethylene. After curing, it has excellent thermal aging performance, compression set and weather resistance.

ENGAGE™8401

Dow®Dow Chemical

ENGAGE™Injection Grade

Injection Molding Industrial Durable Goods and Consumer Durable Goods Impact Modification

Melting finger 30g/10 min, excellent flow characteristics of pellets, high transparency, weight reduction of parts

ENGAGE™8407

Dow®Dow Chemical

ENGAGE™modified composite blending

Impact Modification of Industrial and Consumer Durable Goods for Injection Molding

Melt finger 30g/10 min, excellent flow characteristics can improve the impact resistance of polypropylene and polyethylene after adding talc powder (untreated, 1 µm)

ENGAGE™8411

Dow®Dow Chemical

ENGAGE™modified composite blending

Automotive Thermoplastic Olefin (TPO) Injection Molding Industrial and Consumer Product Press Die Gasket

Melting refers to 18g/10 min, high definition and low density to improve the impact of polypropylene and polyethylene to reduce the weight of parts

ENGAGE™8480

Dow®Dow Chemical

ENGAGE™Blown extrusion film grade

Shoe Material Crosslinked Foam Material Blend Tube and Hose Profile Extrusion

Melting means 1.0g/10 min pellets Good transparency, toughness and softness

ENGAGE™8842

Dow®Dow Chemical

ENGAGE™modified composite blending

Thermoplastic Elastomer for General Purpose Impact-Resistant Modified Wire and Cable

Melting finger 5.0g/10 min, excellent electrical properties can be added to improve the impact resistance of polypropylene and polyethylene. After curing, it has excellent thermal aging performance, compression set and weather resistance.

ENGAGE™8842

Dow®Dow Chemical

ENGAGE™modified composite blending

Thermoplastic Elastomer for General Purpose Impact-Resistant Modified Wire and Cable

Melting finger 5.0g/10 min, excellent electrical properties can be added to improve the impact resistance of polypropylene and polyethylene. After curing, it has excellent thermal aging performance, compression set and weather resistance.

ENGAGE™HM 7387

Dow®Dow Chemical

ENGAGE™modified composite blending

Polymer Modified SEBS Spreader Soft Touch Compound Reduced Gloss TPO Wire Cable Impact Modification

Melt finger 0.50g/10 min, high melt strength and toughness improved talc (untreated, 1µm)

ENGAGE™HM 7487

Dow®Dow Chemical

ENGAGE™modified composite blending

Polymer Modified SEBS Spreader Soft Touch Compound Reduced Gloss TPO Wire Cable Impact Modification

Melt finger 0.50g/10 min, high melt strength and toughness improved talc (untreated, 1µm)

ENGAGE™HM 7487

Dow®Dow Chemical

ENGAGE™modified composite blending

Polymer Modified SEBS Spreader Soft Touch Compound Reduced Gloss TPO Wire Cable Impact Modification

Melt finger 0.50g/10 min, high melt strength and toughness improved talc (untreated, 1µm)

INFUSE™9000

Dow®Dow Chemical

ENGAGE™Blown extrusion film grade

Olefin block copolymer is a high-performance olefin block copolymer, which can be widely used in thermoplastic elastomer applications that require higher operating temperature requirements

High working temperature performance, high flexibility and good elastic recovery, fast setting time to improve processability, excellent compounds and blends of general-purpose elastomers

INFUSE™9100

Dow®Dow Chemical

ENGAGE™Blown extrusion film grade

Olefin block copolymer is a high-performance olefin block copolymer, which can be widely used in thermoplastic elastomer applications that require higher operating temperature requirements

High working temperature performance, high flexibility and good elastic recovery, fast setting time to improve processability, excellent compounds and blends of general-purpose elastomers

INFUSE™9107

Dow®Dow Chemical

ENGAGE™Blown extrusion film grade

Extruded, cast film

Melt finger 1.0g/10 minutes High working temperature performance High flexibility and good elastic recovery Fast setting time to improve processability General purpose elastomers Excellent compounds and blends Talc powder

INFUSE™9500

Dow®Dow Chemical

ENGAGE™Injection Grade

Injection molding and profile extrusion

Melting finger 5.0g/10 min, Polypropylene (PP) and Polyethylene (PE) provide excellent touch for high flexibility and good elastic recovery in overmolding applications