EPDM 430

EPDM 430

Food Grade

Mixing ingredients in inner tube with butyl rubber peroxide curing molded parts

EPDM 430 can also be blended with butyl rubber to improve the processing and curing properties of inner tubes for automobile and bicycle tires

EPDM 520

EPDM 520

Food Grade

General purpose gasket for injection and transfer molded brake components

EPDM 520 brake parts, corner parts, universal gaskets and molds

EPDM 555

EPDM 555

Food Grade

Extruded section coolant hose

EPDM 555 is an amorphous EPDM grade designed for foam extrusion applications

EPDM 565

EPDM 565

General Level

Extruded Profiles/Weatherstrip Sponge Profiles

EPDM 565 is an amorphous, high diene ethylene propylene diene monomer (EPDM) grade designed for extrusion applications requiring fast cure rates

EPDM 570

EPDM 570

General Level

Extruded section coolant hose

EPDM 570 is an amorphous ethylene propylene diene monomer (EPDM) rubber grade designed for extrusion applications. It is very suitable for dense extrusion profiles

EPDM 572

EPDM 572

General Level

Extruded section coolant hose

EPDM 572 is an amorphous ethylene propylene diene monomer (EPDM) rubber grade designed for extrusion applications

EPDM 643

EPDM 643

General Level

Mix ingredients in inner tube with butyl rubber heat resistant hose and belt

EPDM 643 is an amorphous and low diene content ethylene propylene diene monomer rubber (EPDM), suitable for heat-resistant peroxide curing molded products

EPDM 644

EPDM 644

General Level

It can be used to contact all foods except water-in-oil emulsions, high-fat or low-fat, and low-moisture fats and oils. Adhesive Only

EPDM 644 is a semi-amorphous ethylene propylene diene monomer (EPDM) rubber grade designed for molding and extrusion applications. It is very suitable for general gaskets and molded products, extruded profiles and hoses

EPDM 720P

EPDM 720P

General Level

Modification of plastics, e.g. polyethylene or polypropylene peroxide-cured heat-resistant mouldings

EPDM 720P is a semi-crystalline ethylene-propylene-diene terpolymer (EPDM) with very low diene content, low viscosity, excellent processing characteristics, and low unsaturation

EPDM 722P

EPDM 722P

General Level

Peroxide-cured heat-resistant moldings for medium-voltage wires and cables

EPDM 722P is a semi-crystalline, very low diene polymer with low viscosity and good processability. Low unsaturation provides excellent long-term thermal and UV stability

EPDM 725P

EPDM 725P

General Level

Hose for high hardness extruded profiles and moldings

EPDM 725P is a low viscosity semi-crystalline grade with easy processing, fast curing speed and high curing state using standard sulfur curing system

EPDM 763P

EPDM 763P

General Level

It can be used to contact all foods except water-in-oil emulsions, high-fat or low-fat, and low-moisture fats and oils. Adhesives only.

EPDM 763P is a medium viscosity, medium ethylene-propylene-diene terpolymer (EPDM) with a medium cure rate, suitable for low modulus requirements

EPDM 764P

EPDM 764P

General Level

Extruded Hose

EPDM 764P is a semi-crystalline ethylene propylene diene monomer (EPDM) terpolymer. The unique bimodal ethylene distribution of the polymer provides a balance of processing characteristics not found in other semi-crystalline EPDMs